There is an adjusting knob on the side under the slide tray. It should lower the tray to allow you to use the 40x or 100x magnification. It should raise & lower the entire tray.
What kind of microscope are you using? What kind of slide?
Here are some pics I took a while back of cocci they are small compared to the other more common stomach/intestinal eggs, you definitely need 40x to see them.
Here are some eggs I photographed last week when I was running some fecals. These all came from an almost 3mo doe, she didn't have any big #'s, but I have never seen 4 different ones in the same goat.
This is most common, I have been told this is the Brown stomach worm
This one is possibly Barberpole, or Trichostrongyle
Very rarely do I ever see this one
and again, very rarely do I see this one. I have not looked closely into these last 2 (yet), I've been meaning to ask a friend who is more experienced in identification.
This is the microscope I bought:
40X-1000X All-Metal All Optical Glass Lens Student Biological Field Microscope with LED light Omax eyepiece camera included. Take pictures or videos downloaded to your computer. three objectives 4X, 10x, and 40x with two wide field eyepieces 10x and 25x. I added a mechanical stage for precise slide movement and a full diaphragm to enhance contrast. AmScope M100C-LED
The slides are just regular glass slides, not the special vet ones.
I just bought it used and going with the slides that came with it for practice.
It's very interesting that's for sure! My 13yo daughter will be learning to do fecals, I'm going to teach her next time, which will probably be this weekend.
Did you see my post from last year that shows larvae moving in the eggs? THAT was freaky! I left a sample in the fridge for 2 days by accident in a sealed container. So when I pulled it out to do it, I got a crazy surprise lol If you haven't seen it I'll look for that post and share the link.
Thanks! I had planned to compare to the charts last night and see if I could get proper ID or message a friend and totally spaced it. I see that one very randomly. I treated with Quest Plus about 2 weeks ago, and this was after that, treated with Equimax, so I am going to run another fecal 7 days after deworming and see if the Equimax (Ivermectin/Praziquantel) did anything if not, I know it's not as effective, if I see less, then I know Ivermectin is still useful.
Dewormers are hard to figure out. Here where we are in SETX, it is wet and humid so worm heaven. We use a rotation of dewormers, as needed for what the fecals so. We also use Pyrantel or Quest when we need to pack a punch to knock a worm load down. We will use Cydectin, Valbazen, depending on what the fecals show and we use Long Range every 4 months across the board. We also copper bolus every 6 months and use pumpkin seeds. So far, this regiment has served us well.
Ok, now I can post my suspicious worm looking pics. What do you think, are any of these lungworm larvae? After I saw these in the fecal, I heard the goat in question cough of course.... thanks for any help
Ok, now I can post my suspicious worm looking pics. What do you think, are any of these lungworm larvae? After I saw these in the fecal, I heard the goat in question cough of course.... thanks for any help View attachment 186911
Also, I saw my first worm egg. I had read that when you see one you will know right away... and I did. I didn't realize they would be this big. Nematodirus.
:update:
Ok, so those were NOT lungworms.
I found the home lungworm test here on TGS, where you tie poop in gauze and float it in water overnight. There were no lungworm larvae on the surface, for any of my goats.
And Willow got 6 days worth of yummy herb balls, which doesn’t hurt.
The coughing has subsided.
Also, I have the McMaster slides now.
It says in the instructions to focus on the gridline.
So, do you keep the focus the same, or do you focus theough the different layers? I kept it the same, as it said the eggs would be at the top. But I wondered if I missed eggs that were not in focus.
Thanks
I have the McMaster slides now.
It says in the instructions to focus on the gridline.
So, do you keep the focus the same, or do you focus theough the different layers? I kept it the same, as it said the eggs would be at the top. But I wondered if I missed eggs that were not in focus.
Thanks
It’s looks like barber pole to me also. I new at this myself. I am amazed that you can do a picture of it. How did you do this? Do you have a special microscope? Just curious. Thanks.
It's looks like barber pole to me also. I new at this myself. I am amazed that you can do a picture of it. How did you do this? Do you have a special microscope? Just curious. Thanks.
You focus through the different layers. Mine have different colored filters so some eggs show up in the green spectrum and some show in the purple spectrum and so on. Just make sure that your air bubbles are always in focus and you will see the eggs.
Hey lady
With the Mcmaster slide..find your grid..start in either the top or bottom..but you should see 3 blue/teal lines a little like a line but more dot edged..then find your air bubble to.fine tune. Then you.should be on the layer most of your worms ahould be. And the Cocci should bd easy to see slso.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
The Goat Spot Forum
1.8M posts
43.1K members
Since 2007
A forum community dedicated to goat owners and enthusiasts. Come join the discussion about breeding, health, behavior, housing, adopting, care, classifieds, and more!